0.192 in. ID 0.250 in. OD 1.540 in. Long Brass Spacer - AndyMark, Inc

This brass tube can be used in low load applications such as roller axles or as a spacer for a #10 screw. This tube is 1.54 inches long and has an outside diameter of 0.25 inches.

This Nylon spacer is 1 inch long and has an inside diameter of 0.194 inches.

0.194 in. ID 0.375 in. OD 1.000 in. Long Nylon Spacer

Spacers help keep things in place in a multitude of ways. You can use this to slip over a shaft that is smaller than the inside diameter, between

0.140 in. ID 0.250 in. OD 0.156 in. Long Nylon Spacer

0.140 in. ID 0.250 in. OD 0.156 in. Long Nylon Spacer - AndyMark, Inc

This nylon spacer is 0.813 inches long and has an inside diameter of 0.192 inches.

0.192 in. ID 0.500 in. OD 0.813 in. Long Nylon Spacer

This aluminum spacer is 1.000 inches long and has an outer diameter of 0.313 inches.

0.192 in. ID 0.313 in. OD 1.000 in. Long Aluminum Spacer

0.330 in. ID 0.470 in. OD 1.180 in. Long Nylon Spacer - AndyMark, Inc

0.192 in. ID 0.313 in. OD 2.000 in. Long Aluminum Spacer - AndyMark, Inc

This spacer is used in the Snap Latch Assembly.

0.192 ID 0.375 OD 0.125 Long Steel Spacer

0.192 in. ID 0.375 in. OD 0.250 in. Long Aluminum Spacer - AndyMark, Inc

0.500 in. ID 0.625 in. OD 0.570 in. Long Nylon Shoulder Spacer - AndyMark, Inc

Home - Mechanical - Hardware - Spacers - AndyMark, Inc

This is a plastic shoulder spacer. It is a spacer with a flange on one end. It is particularly usefull for turning a 1/2 in. round bearing into a 3/8

0.375 in. ID 0.500 in. OD 0.320 in. Long Nylon Shoulder Spacer

Home - Mechanical - Hardware - Spacers - AndyMark, Inc

0.500 in. ID 0.625 in. OD 0.570 in. Long Nylon Shoulder Spacer - AndyMark, Inc

0.375 in. ID 0.500 in. OD 0.375 in. Long Nylon Spacer - AndyMark, Inc